Friday, September 2, 2011

POLY FIT UPVC PIPE

Poly fit solvent joint UPVC SYST


UPVC FITTING DETAILS







































          ASTM D2466  UPVC SCH-40
Fitting Pieces Per CartonFittingsPieces Per Carton
Elbow 45°116Yee   2"80
Elbow 45°60Yee   3"24
Elbow 45°40Yee   4"16
Elbow 45°12Yee   6"4
Elbow 90°80P. Trap   72
Elbow 90°48P. Trap   24
Elbow 90°32P. Trap   16
Elbow 90°15Cleaning I270
Elbow 90°8Cleaning I72
Elbow Ma48Cleaning I36
Elbow Ma32Cleaning I12
Plug Elbo40End Cap  280
Plug Elbo26End Cap  90
Plug Elbo8End Cap  48
Tee   2"60End Cap  15
Tee   3"33Off Set   20
Tee   4"24Off Set   24
Tee  5"11Socket    123
Tee   6"6Socket    60
Plug  Tee27Socket    66
Plug  Tee18Socket    21
Plug  Tee6Multi Floo18
M.F  Tee24
ReducedPieces Per CartonReducedPieces Per Carton
Elbow    378Socket  3"80
Elbow    434Socket  4"48
Tee        340Socket   448
Tee       4"32Bush     3"100
Tee       4"24Bush     4"60
Tee       6"8Bush     4"60
Yee       424Bush     6"15
Yee       420
Yee   6"/46
 Pipes for both PRESSURE and NON-PRESSURE
[schedue 40] and NON-PRESSURE sizes from 2 inch to 8 inches dimension   
SDR SERIES 
SDR-26, SDR-32.5, SDR-64
In B.S. Standard 3505
CLASS B for 6 bar pressure rating pipes commonly applied and installed for house hold sewer systems.
CLASS C for pressure pipe systems commonly used in pressure water installation and it bears 9 bar pressure.
CLASS D  for pressure pipe systems commonly used in pressure water installation, sprinkler, tube well etc and it bears 15 bar pressure.
CLASS M only used in NON-PRESSUE Installation like house hold sewerage installation or drain water application.

DELIVERY  any where in PAKISTAN
CONTACT +92-300-2856741

1 comment:

  1. Solder fittings, which are short sections of smooth pipe designed to slide over the outside of the mating tube, are usually used for copper joints. There are two types of fittings: end feed fittings which contain no solder, and solder ring fittings.

    ReplyDelete